65mm or 80mm Spindle Dust Boot for the Onefinity, Shapeoko, Mill Right, CNC4 Newbies, Inventables and many more. Works with any 65mm or 80mm spindle or router Like the Makita Router. 

This was amazing and fun to design. It is one of a kind and no other dust boot offers so much viewing space and easy access to your bit. No more taking off your dust boot or taking the vacuum hose off and setting it down on the waste board!!

This thing has a ton of suction  even without the removeable front brushes           

 

Here are some of the unique qualities compared to other spindle mounted dust boots

1: Hinges open to allow easy access for your bit changes. No more unhooking your dust collector hose or taking off your dust boot to change bits

2: Huge window to allow for viewing what exactly is going on during your carve.

3: Comes 98% Assembled!!! (just put one of the brushes in and be done)

4: Detach the front brushes and still vacuum most of the dust. This think has massive suction!!!!

5: The Swinger comes with a Cam Lever to help make one handed adjustments to the height of your boot 

6:3D Printed in ABS filament

7: 65mm option comes with 1.5" Brushes and the 80mm option comes with 2" brushes

8:Multiple Hose Adapters available so it will work with 99% of vacuums on the market today

Do you use another size hose besides the 2.5" dust collector hose? No problem The Swinger also offers 4 inch, Fein, SerfPrep, and Festool hose adapters

Purchase here